How to install Conservatory Roof Inserts in your polycarbonate roof
Easy step-by-step guide to installing Polycool Solar Control Inserts.
Standard Polycarbonate Roof Instructions
 |
 |
 |
 |
 |
 |
- Remove panel end capping
- Remove any sealing tape
- Punch a hole through the Solar inserts (using the hole punch provided)
- Insert film with the assistance of the Unique Polycool installation tool
- Cut the insert to length
- Replace breather tape and panel end caps
For Everlite, Ultralite 500 and other widespan conservatory roofs you will not need to remove or replace any breather tape, these roofs will have channel end plugs or a fascia board covering the end of the roof panels.
Full fitting instructions are provided with every order of Polycool,
To download our fitting instructions click here.
For any further information or to request a DVD please contact us.
Polycool Installation Service
If time is at a premium or you would like us to fit on your behalf, call us on 01789 766880 for a competitive fitting quotation.
Our fully trainined Polycool installation technicians are highly skilled, friendly, reliable and have years of experience attending to all areas of conservatory roofs.
We do not use 'part time installers' or sub contractors who may not have the necessary skills or experience.
Polycool Technical Specifications
Film tested under ASHRAE & CEN10 conditions using ASHRAE, ASTM, IWFA and AIMCAL calculations and test procedures.
| Silver Film | Gold Film | |
|---|---|---|
| Total Solar Energy Rejected (typically) | 85% | 85% |
| Glare Reduction (typically) | 85% | 87% |
| UV Blocked (300-380 nanometers) | 98% | 99% |
| U Value (Imperial Value) | 1.02 | 1.02 |
| U Value (Metric Value) | 5.79 | 5.79 |
| Film Thickness - unembossed (typically) - embossed (typically) | 95 microns 175 - 200 microns |
75 microns 140-150 microns |
Performance results of solar film are subject to variations within industry standards and glazing configurations. They are nominal and only intended for estimating purposes.
